Improvement of Mechanical Properties of AISI 1017 Steel by using Severe Plastic Deformation (SPD)
DOI:
https://doi.org/10.65405/f5x3vz45Keywords:
Shot Peening (SP), Severe Plastic Deformation (SPD), Low carbon steel, AISI 1017, Arc welding, Optical microscope (OM), X-Ray Diffraction (XRD), Yield strain, Ultimate tensile strength, Yield strengthAbstract
In this research, we will study the effect of Severe Shot Peening (SSP) and Conventional Shot Peening (CSP) the physical and mechanical properties of AISI 1017, shot peening caused changes in its microstructure and decreased the ductility of the metal that are indicated in XRD, and experiments showed improvement in tensile strength. Hardness of alloy increased in treated specimens, and values indicate improvement in ultimate tensile strength and yield strength values with SSP and CSP, respectively, also, decrease in ductility with shot peening, in addition, changes in microstructure, and deformation intensities are increased, while the layer thickness increase in the SSP case, in comparison with the CSP case are indicated through XRF XRD, optical microscopy analyses.
The aim of this research is to test the effect of SPD through shot peening and electric arc welding on microstructure and the mechanical properties of AISI 1017 steel alloys.
Downloads
References
[1] M. K. Singh, "Application of Steel in Automotive Industry," International Journal of Emerging Technology and Advanced Engineering, vol. 6, no. 7, pp. 246-253, 2016.
[2] V. Sharma, R. Kumar, H. Singh, W. Ahmad and Y. Pratap, "A Review Study on uses of steel in construction," International Research Journal of Engineering and Technology, vol. 4, no. 4, pp. 1140-1142, 2017.
[3] A. Kubit, M. Bucior, W. Zielecki and F. Stachowicz, "The impact of heat treatment and shot peening on the fatigue strength of 51CrV4 steel," Procedia Structural Integrity, vol. 2, pp. 3330-3336, 2016.
[4] D. Kumar, S. Idapalapati, W. Wang and S. Narasimalu, "Effect of Surface Mechanical Treatments on the Microstructure-Property-Performance of Engineering Alloys," Materials (Basel), vol. 12, no. 16, p. 2503, 2019.
[5] H. S. Ho, D. L. Li, E. L. Zhang and P. H. Niu, "Shot Peening Effects on Subsurface Layer Properties and Fatigue Performance of Case-Hardened 18CrNiMo7-6 Steel," Advances in Materials Science and Engineering, 2018.
[6] D. Cseh, V. Martinger and J. Lukacs, "Residual Stress Behavior in Hardened Shot Peened 42CrMo4 Specimens during Fatigue Load," Materials Research Proceedings, vol. 2, pp. 491-496, 2016.
[7] H. D. Bowman, History and Development of the Steel Industry: Thesis, London: Forgotten Books, 2019.
[8] P. C. Angelo and B. Ravisankar, Introduction to Steels: Processing, Properties, and Applications, Boca Raton, Florida: CRC Press, 2019.
[9] H. Bhadeshia and R. Honeycombe, Steels: Microstructure and Properties, 4th ed., Oxford: Butterworth-Heinemann, 2017.
[10] K. Liverman, Alloy Steel: Features and Applications, New York: NY RESEARCH PRESS, 2015.
[11] A. Fadaei and H. Mokhtari, "Finite Element Modeling and Experimental Study of Residual Stresses in Repair Butt Weld of ST-37 Plates," IJST, Transactionsof Mechanical Engineering, vol. 39, no. M2, pp. 291-307, 2015.
[12] S. Djebali, S. Larbi and A. Bilek, "Tenacity of Sheet Steel ST37-2 by the Essential Work of Fracture Method," Procedia Engineering, vol. 114, pp. 306- 313, 2015.
[13] O. Turcan, O. Dontu, J. L. Ocana Moreno, I. Voiculescu and I. M. Vasile, "Aspects Regarding the Possibility of Increasing Hardness on a Low Carbon Steel ST37-2 by Surface Treatment with CO2 Laser," UPB Scientific Bulletin, Series B: Chemistry and Materials Science, vol. 76, no. 2, 2014.
[14] N. Chhabra and V. Bansal, "A Review of Effect of Shielding Gases Mixture on Welded Joint Properties of Low Carbon Steel in Mig/Mag Welding Process," International Journal of Scientific Research, vol. 5, no. 1, pp. 34-36, 2016.
[15] S. Karthick, S. Muralidharan and V. Saraswathy, "Corrosion performance of mild steel and galvanizediron in clay soil environment," Arabian Journal of Chemistry, vol. 13, pp. 3301-3318, 2020.
[16] R. Rakhmetov, S. A. Krainov, M. N. Nazarova and A. N. Tsenev, "Research of main gas pipelilne (steels X65, X60, 17G1S) susceptibility to stress corrosion cracking, hydrogen uptake and ST 37-2 steel fatigue testing," IOP Conf. Series: Earth and Environmental Science, vol. 194, 2018.
[17] M. I. Mohamed, "Studies of the Properties and Microstructure of Heat Treated 0.27% C and 0.84% Mn Steel," Engineering, Technology and Applied Science Research (ETASR), vol. 8, no. 5, pp. 3484-3487, 2018.
[18] M. Yazdani, M. R. Toroghinejad and S. M. Hashemi, "Investigation of Microstructure and Mechanical Properties of St37 Steel-Ck60 Steel Joints by Explosive Cladding," Journal of Materials Engineering and Performance, vol. 24, pp. 4032-4043, 2015.
[19] M. A. Omari, H. M. Mousa, F. M. Al-Oqla and M. Aljarrah, "Enhancing the surface hardness and roughness of engine blades using the shot peening process," International Journal of Minerals, Metallurgy and Materials, vol. 26, no. 8, pp. 999-1004, 2019.
[20] O. Unal, I. Zulcic, R. Varol, I. Karademir and S. Ates, "Novel type shot peening applications on railway axle steel," Journal of Mineral Metal and Material Engineering, vol. 2, pp. 1-5, 2016.
[21] A. Ampaiboon, O. U. Lasunon and B. Bubphachot, "Optimization and Prediction of Ultimate Tensile Strength in Metal Active Gas Welding," The Scientific World Journal, 2015.
[22] D. Sumardiyanto and S. E. Susilowati, "Effect of WeldingParameters on Mechanical Properties of Low Carbon Steel API 5L Shielded Metal Arc Welds," American Journal of Materials Science, vol. 9, no. 1, pp. 15-21, 2019.
[23] M. A. Bodude and I. Momohjimoh, "Studies on Effects of Welding Parameters on the Mechanical Properties of Welded Low-Carbon Steel," Journal of Minerals and Materials Characterization and Engineering, vol. 3, pp. 142-153, 2015.
[24] O. Turcan, O. Dontu, J. L. Ocana Moreno, I. Voiculescu and I. M. Vasile, "Aspects Regarding the Possibility of Increasing Hardness on a Low Carbon Steel ST37-2 by Surface Treatment with CO2 Laser," UPB Scientific Bulletin, Series B: Chemistry and Materials Science, vol. 76, no. 2, 2014.
